86-0536-3090222
2016 China Supplier Grain Dryer System
Product Description
A. Main structure display:
The high, low temperature drying section and a cooling section; high low temperature drying section between increased a layer of tempering layer, to ensure grain fissuring rate is reduced, low temperature and cold add a layer of tempering layer, to reduce the grain inside.
B.Local structure display:
The overall use of two positions symmetrical design, drying medium from the middle to enter, damp and hot steam from both sides of the exclusion.
C. Local structure display:
The feed wheel is six, one direction, the transmission mechanism is simple, the operation is stable, easy to maintain.
D. Local structure display:
The top feed inlet connector adopts the structure of cross tube, which has the function of resisting abrasion and reducing impact.
Product Features
1. This machine adopts full steel structure, building block type assembly method, on site installation, debugging is simple.
2. The combination of mixed flow drying and drying principle, the tower is not dead, after drying grain moisture uniformity, low breaking rate, less mechanical problems.
3. The utility model has the characteristics of short drying time, large precipitation range, low energy consumption, small occupation area, easy operation and so on.
4. The display model Nissan 200 tons, is the ideal drying equipment to operate food companies.
Application
1. The machine is mainly used to reduce grain moisture, so that the food is suitable for safe water storage or processing.
2. This machine is suitable for the drying of corn, wheat and other grains, which can be reduced by more than 30% to 14% of safe water at a time, and can be work in the northeast cold area -30 under normal temperature conditions.
Technical parameters:
Technical Parameters | Units | 5HHS-200 | |
Grain type &Processing capacity | Maize | t/h | 8.33 (200t/d) |
Wheat | 8.33 (200t/d) | ||
Hot air fan | Model | / | 4-72No.12c |
Pressure | Pa | 2185 | |
Speed | r/min | 1000 | |
Blowing rate | m3/h | 48195 | |
Temperature | .C | 140-180 | |
Power | kw | 45 | |
Hot Blast Stove Rated Heating Capacity | kcal/h | 2400000 | |
Total Power | KW | 115.8 | |
Dimention | mm | 27410×18996×23350 | |
Drying form | / | Cocurrent and Mix-flow | |
Air-cooler | Model | / | 4-72No.12c |
Speed | m3/h | 17527 | |
Power | kw | 11 | |
Safety device | / | Full grain alarm, overload protection device, overheat sensor, control fuse, pressure sensor, combustion engine off alarm. | |
Note | The actual drying rate will vary with the ambient temperature, the hot air temperature, the relative humidity, the material variety and the moisture content of materials. |
Company Information
Realife company is one of 2015 Shandong Province agricultural machinery and equipment R&D project enterprise.Company has a management team with many years of experience in dryig machinery industry. It also hired a lot of experienced R&D and manufacture experts from domestic. The company was established in less than a year.
It developed with independent intellectual property rights and patent products, 4 series of products have been developed for 6T-35T low temperature circulation type, 10T-35T low temperature mixed-flow type, 1T-5T type and 100T-1000T high temperature continuous type etc.
Packaging & Shipping
1. Tell your detailed address.
2. Tell your airport name.
3. Tell your delivery port.
We will deliver the product within 15 days after receiving advance payment.
FAQ
1. What is your MOQ?
Normally our MOQ is 1 set.
2. What is your delivery time?
We deliver in 15 days after receiving the deposit.
3. Can we visit your factory?
Yes, of course. You are welcome at any time. Please contact me and we'll pick you up there.
4. Can you offer easy worn parts?
Yes, we offer easy worn parts with the products.
5. How is your After-Sale service?
Engineers available to service machinery overseas. And if you have any questions, you can contact us at any time.
Please contact me!